Sort by: 
View 

    Chromium carbide para-till ripper point. Replaces 693-599T

    ITEM#: 918-TF123

    Cast with chrome. Will replace 550-148, 681-002.

     Add To Wishlist
    Compare List

    22X1/4 SM 1-1/2"SQ-958

    ITEM#: 114-221405P

     Add To Wishlist
    Compare List

    Shear Bolt 1-1/8" X 5-1/2" Shear Bolt. Will replace 6101822

    ITEM#: 693-TY1512

    1-1/8" X 5-1/2". Will replace 6101822

     Add To Wishlist
    Compare List

    Chromium carbide instep, left hand

    ITEM#: 693-003L

    Chromium Carbide Instep for Parabolic Subsoiler.

     Add To Wishlist
    Compare List

    ROLL PIN-TF123 POINT 8MMX60MM

    ITEM#: 444-RP860

    8MM dia X 60MM length.( longer length available -part # SPM080070 8MM x 70 MM)

     Add To Wishlist
    Compare List

    Chromium carbide instep right hand

    ITEM#: 693-003R

    Chromium Carbide Instep for Parabolic Subsoiler.

     Add To Wishlist
    Compare List

    Chromium carbide upper shin left hand

    ITEM#: 693-004L

    Chromium Carbide Upper Shin for Parabolic Subsoiler

     Add To Wishlist
    Compare List

    BOOTED RIPPER POINT-BOY DOG, MG DICKEY

    ITEM#: 972-PBS30012

    1" thick (without cap) X3" wide X 14-3/4" overall length. Full chrome cap installed. For 1-1/2" shank. Uses 444-RP12X3 roll pin.

     Add To Wishlist
    Compare List

    SELL 918-TF123

    ITEM#: 693-559T

    Chromium Carbide Ripper Point for Bigham/Tye Parabolic Subsoiler.

     Add To Wishlist
    Compare List

    Chromium carbide lower shin left hand

    ITEM#: 693-005L

    Chromium Carbide Lower Shin for Parabolic Subsoiler

     Add To Wishlist
    Compare List

    Chromium carbide upper shin right hand

    ITEM#: 693-004R

    Chromium Carbide Upper Shin for Parabolic Subsoiler

     Add To Wishlist
    Compare List

    Chromium carbide lower shin right hand

    ITEM#: 693-005R

    Chromium Carbide Lower Shin for Parabolic Subsoiler

     Add To Wishlist
    Compare List

    WILCOX PT W/CHROME 1 1/2" BOOT

    ITEM#: 2179-17WI1012CR

     Add To Wishlist
    Compare List

    RIPPER POINT FOR UNVERFERTH

    ITEM#: 972-U64322B

    For Ripper-Stripper, fits shank tip #65117.

     Add To Wishlist
    Compare List

    RIPPER PT SE342 W/CHROME 1-1/4 BIG-ED

    ITEM#: 2179-17SE342CR

     Add To Wishlist
    Compare List

    AC RIPPER PT W/CHROME 403702

    ITEM#: 2179-17AC133CR

     Add To Wishlist
    Compare List

    BUSH HOG SUBSOILER POINT

    ITEM#: 972-41B2509BH

    Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear

     Add To Wishlist
    Compare List

    DUCTILE IRON RIPPER POINT

    ITEM#: 693-559TD

    To be discontinued when out.

     Add To Wishlist
    Compare List

    SUBSOILER POINT BOOTED & CAPPED

    ITEM#: 972-41B2008FCC

    Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times.

     Add To Wishlist
    Compare List

    SUBSOILER POINT W&A NEW STYLE

    ITEM#: 972-41B2010WA2

    Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear

     Add To Wishlist
    Compare List

    NO LONGER AVAILABLE

    ITEM#: 864-007

    Standard/Universal Shatter Plate for Parabolic Subsoiler & Panbraker Models 170 and 175.

     Add To Wishlist
    Compare List

    KMC BOOTED SUBSOILER POINT

    ITEM#: 972-15483

    1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.

     Add To Wishlist
    Compare List

    BRILLION SUBSOILER POINT-BOOTED

    ITEM#: 972-41B2512B

    Booted - 1 x 2 1/2 x 10. Uses 3/8x2 roll pin. Made in the USA

     Add To Wishlist
    Compare List

    Roll Pin Features are 5/16 Inch x 1-3/4 Inch.

    ITEM#: 444-RP516X134

    Roll Pin Features are 5/16 Inch x 1-3/4 Inch.

     Add To Wishlist
    Compare List

    SWEEP HOLDING PLATE, FITS FC12A FOOT

    ITEM#: 864-825P

    Sweep holding plate, fits FC12A foot.

     Add To Wishlist
    Compare List

    RIPPER POINT DMI 7" HS WING CAPPED

    ITEM#: 972-41BDMI711242

    EXTEND-O-WEAR Has carbide point on nose. Fits 1-1/2" shank 730 B 9600 DMI.

     Add To Wishlist
    Compare List

    R & R SUB SOILER POINT-CAPPED

    ITEM#: 693-77RR15000C

    Has full cap.

     Add To Wishlist
    Compare List

    BOOTED RIPPER POINT M&W-7" WINGS

    ITEM#: 972-41B2512MWFW7

    For parabolic shank. Has footed cap.

     Add To Wishlist
    Compare List

    LOWER RH SHIN FOR BHC PARASOIL

    ITEM#: 864-BHC789

     Add To Wishlist
    Compare List

    LOWER LH SHIN FOR BHC PARASOIL

    ITEM#: 864-BHC797

     Add To Wishlist
    Compare List

    SUBSOILER POINT-LILLISTON 132

    ITEM#: 023-15485

    Booted 1" thick, 2-1/2" wide, 12" long

     Add To Wishlist
    Compare List

    UPPER LH SHIN FOR BHC PARASOIL

    ITEM#: 864-BHC803

     Add To Wishlist
    Compare List

    KMC BOOTED SUBSOILER POINT

    ITEM#: 972-SS15BK

    1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.

     Add To Wishlist
    Compare List

    RIPPER POINT DMI 2" W X 12" LONG

    ITEM#: 972-41BDMI211242

    Has full "bump" cap, for 1-1/2" shank.

     Add To Wishlist
    Compare List

    2-1/2" X 12" MW & SF RIPPER POINT

    ITEM#: 972-41B2512SFMW

    2.5" x 12" Booted Ripper Point for Sunflower and M&W. Replaces SN5273 and M&W 2450269.

     Add To Wishlist
    Compare List

    UPPER RH SHIN FOR BHC PARASOIL

    ITEM#: 864-BHC804

     Add To Wishlist
    Compare List

    CAPPED SUBSOILER POINT IH

    ITEM#: 972-41B2508IHC

     Add To Wishlist
    Compare List

    RIPPER POINT CAPPED-BRILLION

    ITEM#: 972-41B2512B2W7

    For Land Commander. 2-1/2" wide x 12" long with full footed cap and 7" HS wings. Fits 1-1/4" shank. Will replace 7K363.

     Add To Wishlist
    Compare List

    POINT BOOTED W/CAP

    ITEM#: 41B2512JDS

     Add To Wishlist
    Compare List

    KMC BOOTED SUBSOILER POINT16-080-102

    ITEM#: 972-39579

    1-3/4" wide x 1-1/4" thick x 11" long. 13/16" boot for 3/4" shank. KMC 16-080-102

     Add To Wishlist
    Compare List

    RIPPER POINT BRILLION LAND COMM

    ITEM#: 972-41B2512B2C

    With 3" cap installed

     Add To Wishlist
    Compare List

    RIPPER POINT-BRILLION LAND COMM

    ITEM#: 972-41B2512B2

     Add To Wishlist
    Compare List

    U BOLT 7/8" X 7" X 6 1/2" OAL SQ.

    ITEM#: 925-S7875

    U bolt for parallelogram clamp assembly

     Add To Wishlist
    Compare List

    Ripper Point

    ITEM#: 41B2012PK

    1 Inch Thick High Carbon, Heat Treated Steel. Also Available with 3 High Chrome Wear Cap. Part#: 41B2012PKC.

     Add To Wishlist
    Compare List

    SUBSOILER POINT

    ITEM#: 41B2508IHS

    Ripper point. For IH 14.

     Add To Wishlist
    Compare List

    POINT BOOTED W/CHROME CAP

    ITEM#: 41B2512SFMWC

     Add To Wishlist
    Compare List

    Big OX Point

    ITEM#: 41WOX

    To Fit Caterpiller Hp-5B-946 and Hensely 2Dh5572H Scarifier Shanks. Slip-On High Chrome Alloy.

     Add To Wishlist
    Compare List
    Sort by: 
    View